☀ This is English version of the short article Cara Atur / Kalibrasi Jam Analog G-Shock GA1000

Do you at this time experience whereby the analogue clock (the minute and hour hand) of Casio G-Shock GA-1000 not showing same time as the digital time? either is various less than one minute or much more than one hour. This can occur suddenly also though you’re not change anything. Or it additionally can happen after you change the battery, etc.

You are watching: How to adjust time on g shock analog and digital

In this tutorial we will present you exactly how to set or calibrate the minute and hour hand (the analog time) the CASIO GA1000 therefore it deserve to synchronize through the digital time (shown same exact time). It likewise can job-related backwardly, in other word you can also use this tutorial come differentiate in between analogue and digital time; either you desire to make it previously or later.

This technique is only deserve to be usage for the original product only; you can’t usage this tutorial for the fake one. So, here’s exactly how to carry out it (picture first – explanation later):


*

How to set Analogue Time that GSHOCK GA1000

action #1: Press and also HOLD readjust button

Press and also hold change Button (upper left) for 4-5 secs Upper right display will show: ADJ > keep pushing until it changes into “H-Set” Bottom screen will display blinking “00”

Step #2: Press setting button

after ~ that, press MODE switch (bottom left) The digital will display blinking “0:00” The analogue watch (minute and hour hand) will start moving clockwise Don’t presses any type of button till it avoid moving.

Step #3: push LIGHT button

Push LIGHT switch (upper right):

If you press once > the analog watch will move a small bit counterclockwise If you press and hold the switch > the minute and hour hand will certainly move automatically (you have the right to release the button). It moving respond to clockwise > press the switch again come stop the movement.

If you want to do or calibrate the analog watch so that will show same time as the digital time, you need to set the minute and hour hand in 12:00 (0:00) clock position (straight up).

See more: What Form Of Lightsaber Combat Does Ahsoka Use ? How Skilled Was Ahsoka In Lightsaber Combat

So, if the time distinction is big, press and hold the LIGHT button until the hand is relocating automatically, then after it close to the 12.00 position, push the LIGHT switch again to protect against the movement. Then push LIGHT button several times until the hour, minute and also seconds hand perfectly align in 12.00 clock position.

If you miss the 12.00 position, also just a small bit, you need to rotate the hand one complete rotation again.

Step #4: press the readjust Button

If it’s done, push the ADJUST switch once come close the setup > the analog watch will moving automatically. That is the way to setting or calibrates the minute and also hour hand (the analogue) watch of Casio G-Shock GA1000. That is simple to do, just follow step by step in this tutorial. Ns Hope you discover this write-up useful

*