There are many species of loose materials the are offered in cubic yards, or “yards,” for short. Topsoil, mulch, and gravel are simply a couple of of the typically used commodities that are offered by this volume metric.

You are watching: How many tons does a tandem dump truck hold


It isn’t just landscapers and contractors who require to have actually knowledge of cubic yards. If you’re going come transport any type of of the materials mentioned over in a recording truck, for example, it’s important to know specifically how much the truck can carry. In the following guide, we’ll discuss how you determine a recording truck’s volume in cubic yards.

Dump van Cubic Yardage - The Basics

While there is room because that variance, many full-size dump trucks have actually a capacity of in between 10 and also 16 cubic yards. These species of vehicles frequently have your capacity provided in the owner’s manual.

Smaller intake trucks, often those mounted on a pickup frame, will have comparably less capacity, occasionally as tiny as 1 ½ cubic yards.

If girlfriend can’t discover your dump truck’s volume in the owner’s manual, don’t worry. It’s relatively simple to recognize using a tape measure and also a calculator.

Measure the width of the van bed, native the inside of one wall to the other. Write down this number in feet to make the calculations simpler. Therefore let’s say your truck bed is 63 inch wide, you would certainly write it under as 5.25 feet.Measure the length of the bed in the exact same fashion and record the number in feet.Measure the height that the bed, beginning from the bottom and extending come the optimal of the tailgate or the sides (whichever is lower).At this point, girlfriend should have actually three figures provided for the width, length, and also height of your bed. Multiply them all together to determine the capacity. Because that a truck bed that’s 14 feet long, 6 feet wide, and also 5 feet high, you would certainly calculate 14 x 6 x 5 = 420. This figure is the capacity of your truck bed in cubic feet.There room 27 cubic feet in a cubic yard, therefore to uncover your cubic yardage, you need to divide the previous number by 27. Using the example over for our 420 cubic foot truck, we would calculate 420 ÷ 27 = 15.56 cubic yards.

Dump Truck volume - an ext Than simply Yardage

A cubic garden represents a block of material that measures three feet on every side. In theory, the material itself can be anything, from water to stone to mulch. For this reason, yardage alone is one imperfect measurement of a recording truck’s overall capacity. Perhaps much more important is the truck’s weight rating.

The load rating will rely on a range of factors, including the truck’s chassis and also suspension. Smaller dump trucks on pickup frames have the right to have a weight limit together low as fifty percent a ton, whereas larger dump van can lug as lot as 15 lots (30,000 pounds) that material. That’s fairly the wide range!

When hauling most materials, the weight of your fill will it is in the limiting factor. Because that example, sand have the right to weigh upwards that 3,000 pounds per cubic yard, meaning that in a massive, 30,000-pound recording truck, friend could bring a maximum of 10 cubic yards. In a dump van on a half-ton pickup frame, you can only bring a third of a yard of sand.

Mulch, in particular, deserve to be difficult to account for, largely due to the fact that it counts on just how wet the is. Dried mulch have the right to weigh as small as 700 pounds every yard, conversely, wet, compost-like mulch deserve to tip the scale at 1,500 pounds per yard.

See more: Is A Mixture Of Water And Oil And Water Homogeneous Or Heterogeneous Mixture


Larger recording trucks deserve to carry around 10 come 16 cubic yards that material. However, the complete volume is not usually the limiting factor. In many cases, the vehicle’s weight limit will determine exactly how much product you are at some point able come safely transport.