Remove the an initial 3 valve cover bolts. Leaving last 2 bolts tight(closest come cab) to do fuel line removal easier.

You are watching: How hard is it to change injectors on a cummins

*

Remove Air ram intake.

*

Remove APPS (Accelerator Pedal position Sensor)

*

Remove heater grid.

*

Insert a clean rag into heater grid hole to keep from droppinganything into the hole and also keep that clean.

*

To remove fuel currently 1,2 and 4 unbolt all fuel line holding brackets.Unplug the fuel injection pump to make removing currently 1,2 and 4 easier.

*

To remove 3,5 and also 6 unbolt engine lifting bracket, then removelines.

*

Now remove the 4th valve cover bolt. Climate loosen the fifth bolt- it will certainly not come out. Lift up on the fifth bolt and rotate valve covering gentlyto the chauffeurs side. Going to the chauffeurs side will assist you stop damagingthe heater hose.

See more: How Long Can A Snake Hold Its Breath Underwater ? How Long Can Snakes Hold Their Breath

Remove pencil tubes (6 total). Constantly remove the pencil tubesfrom the outer edge and the inner edge in the edge filter and also must no be damaged.Replace any kind of pitted or rusted pencil tubes.

*

*

Use a clean container to keep your injector host down bolts, holddowns and also injectors in. Keep these parts clean and also avoid contamination. It is in cleanfrom this suggest on!! Remove external bolts ~ above the injector hold downs. Do NOT removeinner bolts as they space shouldered and also the hold downs come out without removingthese. Execute not remove rocker arms together it is not necessary and only rises riskof dropping contaminants right into engine