mine dash lights unexpectedly dimmed. Still about 10% brightness. Also my brake lights stopped working about 1 mainly ago. I confirm the fuses and also they are good. Readjusted the brake light switch under the console bur no help. The cab brake irradiate work.


You are watching: Ford ranger brake lights not working

*

Hi. If I have the right to jump in here. Much more than most likely you have actually only one of the bulbs working and the dim light that you have is the bleed end from the one. There is a opportunity that you have a wiring issue however if you look at the wiring diagram this bulbs re-publishing a feed and ground with various other systems. So if they room all working then that is i can not qualify to have actually a short. If it to be me, I would certainly pull the cluster and check the bulbs since the warning indications are every illuminated independently from these gauges.
*

*

*

*

Brake light no working. Fuse are an excellent bulbs good, brand-new brake switch. Signal works. Once head light room on lights space good. All three brake lamp don't work.


See more: 2014 Gold Buffalo Coin Copy Value Of 2014 $50 Buffalo Gold Coin

at the finish of my response, I contained links to aid with testing. First, check there is power at fuse 19 in the fuse box best kick panel. (see pic 1)If the fuse is an excellent and over there is strength from it, inspect the wires in ~ the brake irradiate switch. There space two. An initial the blue/red wire should have 12v every the time. When the switch is actuated, power should feed come the violet/white wire. See snapshot 2If power is present, that feeds come the violet/white wire when the switch is actuated, confirm the move is properly readjusted and actuating the switch when the brake is applied.The following area of feasible concern is a splice. Take it a look in ~ pic 3. The wire on the left goes come the third brake light and the one top top the ideal (both the exact same color) goes to the brake lights. If the splice is good and strength is there, the trouble is in between that suggest and the irradiate sockets. Ns feel it is unlikely that the trouble is the splice just since the signal work. The splice is likewise used because that the danger lights. See picture 4Here are the directions details to this car for brake light switch replacement. Take it a look v them to check all was put together correctly. The last two images correlate through the directions.Removal and also Installation 1. Disconnect the stop-lamp switch electrical connector. 2. Remove the cover and the self-locking pin. 3. Remove the stop-lamp move from the brake booster press rod and the brake pedal assembly. - eliminate the spacer. 4. To install, reverse the remove procedure.https://www.gimpppa.org/articles/how-to-check-a-car-fuseI don't think the problem is a ground issue. All tail lights ground in ~ the same allude and other lights room working.Check out the diagrams (Below). Please let us understand what friend find.