You are watching: Dodge ram check gauges light battery low
First actual cold night, if that method anything. Alarm sound after 5 secs of beginning and inspect gauges light come on and the only gauge the was not functioning was the battery gauge. Drove 50 miles. After stopping for approx. 30 minutes, began truck and everything fine climate it occurred again. Engine many warm. The gauge only registered about 10V rather of the normal 14V prior to it quit working.Any ideas? whatever is good otherwise.Woodyjrwoody52
Could it is in a many things from dirty battery terminals, loosened fan belt to a negative alternator. Ns would begin by check the voltage in ~ the battery with the eng. Running, through the light both on and off. After ~ driving the 50 miles the battery got enough charge come shut the light/alarm off and then that came earlier on after driving a little, choose it to be loosing the fee while driving. Could be a poor battery also.
See more: Today"S Value Of French Franc In 1940 2 French Franc, Historical Currency Converter
I watch what girlfriend mean. The light continued to be on all the time till I stopped the truck and turned it turn off for about 30 minutes. Then started it earlier up come head home and also the light to be briefly turn off for 10 seconds and came back on. I"ll begin with the easy and also inexpensive checks first. As soon as I obtained home i was idling and also turned on every electrical, lights/heater/etc. And also lights did not dim. V two battery it might be difficult to tell. I don"t should spend anymore money right currently if i don"t have actually to. A lot on mine plate. Thanks!
CHeck Gauges instrument irradiate on then turn off then on then offI will apologize best now because I have actually probably post wrong.***I have come to believe the "Check Gauges" irradiate is an indicator that also trained mechanics do not completely understand.On mine 2007 Dodge ram 1500 SLT 4.7 Flex Fuel I have actually an intermittent inspect Gauges problem.The instrument swarm "Check Gauges" irradiate will stay on ~ engine starts. The Oil pressure gauge will certainly not read.Turn off engine and also re-start engine and the "Check Gauges" light will go off and stay off and gauges will show normal levels.This is a repeatable pattern.Start engine and "Check Gauges" irradiate will stay on.Turn off engine and also re-start engine and "Check Gauges" light will go out with normal indications.I have actually been told number of items could be the problem but cannot small them down to any type of one item bring about problem.One time while driving the "Check Gauges" light come on and all gauges failed to indicate.I"ve been told:Short in wiringInstrument swarm badOil sending Unit badKey Cylinder badIgnition move badThe only thing that is details is the difficulty exists between the prior bumper and the rear bumper.If over there is anyone analysis this that has an answer, or a an excellent solid guess, I would certainly appreciate listening it.By the way, other than this aggravating trouble the truck runs as good as ever also though it has 155,000 miles with just the wait compressor being replaced.