Welcome come the gimpppa.org in-depth company menu on WK Generation Jeep grand Cherokee. We have actually organized together much info as we might find into a helpful short article below. Is something untrue or missing? Please get in touch through us and we’ll resolve it!
The following is a perform of factory recommended organization intervals and related info pertaining to 2005 cool Cherokee WK models (USA). Distinctions will be noted as the info becomes available. Befe performing any type of service, inspect your vehicle owners manual for verification of intervals, capacities and also other recommendations, cautions and also warnings.
You are watching: 2005 jeep grand cherokee transmission fluid capacity
WARNING: You deserve to be badly injured functioning on or approximately a motor vehicle. Do just that company work for which you have the proper equipment. If friend have any doubt around your capability to perform a service or maintenance job, take your vehicle to a proficient mechanic.
Service expression “A” (Light)
Service term “A” is for vehicles that room not operated under any of the conditions listed under Schedule “B.” many vehicles space operated under the conditions noted for Schedule “B”. Usage the schedule that ideal describes her driving conditions. Whereby time and mileage space listed, follow the interval the occurs first.
Service expression B (Heavy)
Follow this schedule if girlfriend usually operate your vehicle under one or an ext of the following conditions:Day or night temperature are below 0°C (32°F)Stop and go drivingExcessive engine idlingDriving in dusty conditionsShort trips of much less than 16.2 kilometres (10 miles)More than 50% of her driving is at continual high speeds during hot weather, above 32°C (90°F)Trailer towingTaxi, police, or delivery organization (commercial service)Off-road or desert drivingIf equipped for and operated v E-85 (ethanol) fuel.
|Grand Cherokee WK maintain schedules|
Maintenance schedule grand Cherokee (North America) – PDF file
Maintenance schedule grand Cherokee (europe) – PDF file
Maintenance schedule grand Cherokee (middle eastern / China) – PDF file
Maintenance schedule grand Cherokee (diesel engines) – PDF file
Maintenance schedule cool Cherokee SRT8 (North America) – PDF file
Maintenance schedule cool Cherokee SRT8 (europe) – PDF file
Maintenance schedule cool Cherokee SRT8 (middle east) – PDF file
|Description||Specification / Capacity||Type / part #||ServiceIntervalA||ServiceIntervalB|
|Air Cleaner Filter|
|3.0 V6 CRD3.7 V6|
5.7 V8 Hemi
213mm (rear)213mm (rear, ELSD*)
226mm (rear, SRT8)
C213R70.0 oz. (± 2 oz.)C213RE75.5 oz. (± 2 oz.)
Mopar p/n 04874469 (MSRP $33.50 every quart)
Electronic axle notes:
Electronic (ELSD) axles require 118 ml (4 ounces) of minimal Slip Additive be added to the lubricant. (Mopar additive p/n 04318060AB $10.50 MSRP 4 oz. Bottle)
ELSD axles room standard v Quadra-Drive II.
SRT8 axles do NOT require minimal Slip Additive.
Axle covering bolt torque:
Front and also rear axle drain plug torque: 44 ft. Lbs/60 N·mFront axle cover bolts: 41 ft. Lbs/56 N·mRear axle sheathe bolts: 30 ft. Lbs/41 N·m
See images at far left for added axle information.
SRT8 axle and also t-case fluid change directions
6 qts. (w/filter, 4.7 V8)
Synthetic Engine Oils: You might use man-made engine oils listed the encourage oil quality demands are met, and also the recommended maintain intervals for oil and also filter changes are followed.
6.1L V8 Hemi
7 qts. (w/filter, 6.1 V8)*
(Note: the is vital to use only 5W-20 oil for proper operation of the multiple Displacement System. Usage of various other weight oil will influence the on/off timing window of the MDS system and also may also result in unbalanced engine wear).
0W-40 or 5W-40 (6.1 V8 Hemi)
*Note because that the 6.1L engine: The oil readjust specification calls for 7 quarts the oil when an altering the oil and filter. Some owners have actually reported a slim to moderate overfill analysis on the dipstick once installing a complete 7 quarts. The 6.1L engine drains the oil slow than other engines. Drain the old warmed oil because that at the very least 20 minutes to gain as lot out together possible. Us suggest including around 6-1/2 quarts, operation the engine for a few minutes, shut the down and let sit for awhile, climate fill as neccessary to lug the analysis to the safe area on the dipstick. The top of the for sure area stand for the suitable “full” level. Keep in mind that adding a complete 7 quarts (with filter change) will never ever overfill the engine to together an degree that any oil foaming or harm will result, even if the level is past the “safe” reading on the dipstick.
|Engine / Year||2005||2006||2007||2008||2009||2010|
|3.0L V6 diesel||05175571AA|
|4.7L 5.7L 6.1L V8(filter wrench size = 93mm x 15 flutes)||05281090(MO-090)||04884899AB*(MO-899)|
|*Note: 2008-2010 models of the 4.7, 5.7 and also 6.1L engines use oil filters with a brand-new thread size (22mm). The vault oil filter (p/n 5281090, thread size 3/4-inch – 16 UNF) will certainly not to the right on 2008-2010 engines.|
grand Cherokee WK’s use three different transfer cases, identified on the interior shift console. A one ID tags is attached come the behind of each transport case. The i would tag offers the transfer case model number, assembly number, gear ratio and also location that manufacture. The transfer instance serial number also represents the date of build. See also: WK Four-Wheel Drive solution
(***Usage of various other fluids/lubricants is no recommended***)
Transfer case drain plug torque: 15-25 ft. Lbs/20-34 N·m
or Castrol BOT89 M1 to add lubricant
(***Usage of various other fluids/lubricants is no recommended***)
Transfer instance drain plug torque: 15-25 ft. Lbs/20-34 N·m
NOTE: The fluid full level top top the NV146 is 25-35 MM (0.98-1.38 In.) listed below the bottom of the fill plug. This is different from the other Grand Cherokee applications. It is necessary that the transfer case not it is in overfilled and also that the correct fluid is used.
SRT8 axle and t-case fluid adjust directions
FLUID ADDITIVES:DaimlerChrysler strongly recommends against the addition of any fluids come the transmission, other than those automatic infection fluids listed above. Exceptions to this plan are the use of unique dyes to assist in detecting liquid leaks. Miscellaneous “special” additives and also supplements exist that claim to improve change feel and/or quality. This additives and also others additionally claim to boost converter clutch operation and inhibit overheating, oxidation, varnish, and also sludge. These insurance claims have not been supported to the satisfaction of DaimlerChrysler and also these additives should not it is in used. The usage of infection “sealers” should also be avoided, due to the fact that they might adversely influence the verity of infection seals.
|FILTER SEAL fist (545RFE):The main oil filter seal should be completely installed flush versus the oil pump body. Carry out NOT download the seal ~ above the filter neck and also attempt to download the filter and also seal together an assembly. Damage to the transmission will result. Download the brand-new primary oil filter seal in the oil pump inlet bore. Chair the seal in the bore with the butt end of a hammer, or other suitable tool. Place replacement filter in position on valve body and also into the oil pump. Download screw to hold filter come valve body. Tighten screw come 40 in. Lbs. Torque.|
|CHECKING THE TRANSMISSION liquid LEVEL:NOTE:If equipped v a dipstick, usage the complying with procedure. If your vehicle has a capped dipstick tube, the is sealed and also should no be tampered with. Her authorized dealer has the ideal tools to ensure that the fluid level is collection properly.Check the fluid level while the transmission is at typical operating temperature. This occurs after at least 15 miles (25 km) that driving. At regular operating temperature the fluid cannot be hosted comfortably in between the fingertips.To check the automatic transmission liquid level properly, the complying with procedure must be used:1. Operate the engine at idle speed and also normal operating temperature.2. The automobile must be on level ground.3. Fully apply the parking brake and also press the brake pedal.4. Ar the gear selector momentarily in each gear position ending with the bar in ns (Park).5. Remove the dipstick, wipe the clean and also reinsert it till seated.6. Eliminate the dipstick again and also note the fluid level on both sides. The fluid level should he between the “HOT” (upper) recommendation holes on the dipstick at typical operating temperature. The fluid level is just valid if over there is a hard coating that oil is viewed on both sides of the dipstick. If the liquid is low, add as compelled into the dipstick tube. Carry out not overfill. After adding any amount of oil with the oil to fill tube, wait a minimum of two (2) minutes for the oil to completely drain right into the transmission prior to rechecking the fluid level.NOTE:If that is essential to inspect the transmission below the operation temperature, the fluid level must be between the 2 COLD (lower) holes on the dipstick with the liquid at around 70 F (21 C) (room temperature). If the liquid level is correctly created at room temperature, it should be in between the “HOT” (upper) recommendation holes as soon as the transmission reaches 180°F (82°C). Remember the is ideal to inspect the level in ~ the normal operating temperature.CAUTION!Be mindful that if the liquid temperature is below 50°F (10°C) it may not register on the dipstick. Perform not add fluid until the temperature is elevated sufficient to produce an accurate reading.|
7. Inspect for leaks. Relax parking brake. To avoid dirt and also water indigenous entering the transmission after checking or replenishing fluid, make certain that the dipstick lid is appropriately resealed. The is common for the dipstick lid to spring back slightly from its fully seated position, as lengthy as its seat remains involved in the dipstick tube
Filter: (internal, flat) p/n 52108325AA
|100,000 mi.||60,000 mi.|
|545RFE(Note: easily accessible with 4.7 V8 and 5.7 V8 engines only)||5.5 qts. (2WD service)6.5 qts. (4WD service)|
Filter # 1 (internal, flat):2WD – primary filter: p/n 5015267AD($39.45 MSRP)
4WD – main filter: p/n 5013470AD($37.75 MSRP)
Filter # 2 (internal, round):All – Cooler return filter: 05179267AC (formerly p/n 4799662)($19.85 MSRP)
CAUTION: do not use coolant additives that are asserted to improve engine cooling.
Avoid non-HOAT mixtures, such together Prestone 50/50, that claim they can be provided in vehicles of “all makes, every models”.
|100,000 mi.60 mo.||75,000 mi.|
|Fuel||Tank sizes:20.5 gallons(2005-2006 models)21.5 gallons(2007-up models)22.0 gallons(2007-up diesel models)||Diesel:Use just the ideal quality fuel v a calculation Cetane index of 50 or higher. In addition, the manufacturer recommends making use of diesel fuel v a sulfur contents of less than 350 ppm.|
87 octane regular unleaded(3.7L, 4.7L and also 5.7L)
89 octane Mid-grade unleaded(5.7 V8 Hemi, recommended because that maximum performance)
91 octane or higher Premium unleaded(6.1L Hemi)
NOTE: The use of Premium petrol is no recommended for the 3.7L, 4.7L or 5.7L engines. Under regular conditions, the use of Premium gasoline will not provide a benefit over high high quality Regular and also Mid-grade gasoline, and also in some situations may result in poorer performance.
5.7 V8 hem (2005-2008)Mopar p/n SPRE14MCC4 (Champion 570)(.045 gap, 16 plugs, tighten come 13 ft. Lbs.*)
(*NOTE: The 5.7L V-8 is equipped v torque an essential tapered architecture spark plugs. Execute not exceed 15 ft. Lbs. Torque.)
5.7 V8 hemi (2009-2010)Mopar p/n SPLZFR5C11G (NGK)(.040 gap, 16 plugs, tighten come 13 ft. Lbs.*)
(*NOTE: The 5.7L V-8 is equipped with torque crucial tapered architecture spark plugs. Execute not exceed 15 ft. Lbs. Torque.)
6.1 V8 HemiMopar p/n SPLZTR5A13 (NGK twin Platinum 4998)(.040 gap, 16 plugs, tighten come 13 ft. Lbs.*)
(*NOTE: The 6.1L V-8 is equipped through torque an important tapered architecture spark plugs. Execute not exceed 15 ft. Lbs. Torque.)
|30,000 mi.SRT8 102,000 mi.||30,000 mi.SRT8 51,000 mi.|
|Throttle body cleaning||THE accelerator BODY ***CANNOT be CLEANED,*** carry out NOT use SPRAY CLEANERS OR use SILICONE LUBRICANTS to ANY component OF THE accelerator BODY. These types of commodities can damages the accelerator body components. The throttle body has no serviceable components and is changed as one assembly.||(not required)||(not required)|
|Tire rotation||All models other than SRT8(DO NOT turn tires ~ above SRT8 models)||6,000 mi.|
See more: How Far Is Perth From Melbourne Distance (Per To Mel), How Far Is Melbourne From Perth