The oil sending unit ~ above the 2000 Ford F-150 relays the oil press from the engine to the oil pressure gauge top top the dash. The oil sending out unit is one of the most important contents on the engine. The oil is pumped up from the oil pan through the oil pump and also through the engine. When the oil is circulating v the engine, the oil passes with the oil sending unit. The oil sending unit then tells the oil gauge the specific oil pressure. When the oil sending out unit stops working, friend will must replace it as soon as possible.
You are watching: 2001 ford f150 oil pressure sensor location
Jack the prior of the truck up and place jack stands underneath the prior axle. Make sure that the jack stands space evenly and also securely under the front axle. Lower the truck onto the axle.
Remove the driver"s side front tire. Revolve the lug nuts counterclockwise to loosen and remove the lug nuts. Traction the tires off and set it to the side.
Locate the oil sending unit on the driver"s side of the engine. The oil sending out unit top top the 2000 Ford F150 is situated underneath the oil filter. The oil sending unit will certainly be screwed into the oil filter housing. Remove the wiring insert native the bottom the the oil sending out unit. Press in ~ above the plastic cable connector and also pull the wiring connector the end of the bottom of the oil sending out unit. Placed an open end wrench approximately the head that the oil sending unit close to the threads and loosen the unit by transforming it counterclockwise. When the oil sending unit is loose, you can remove the by unscrewing it through your fingers. Place a tiny catch pan under the oil sending out unit come retrieve any excess oil.
Wrap Teflon tape roughly the threads of the oil sending out unit. Be certain to pave the Teflon ice cream counterclockwise approximately the subject or the tape will come off once you screw the oil sending unit back into the filter housing.
Screw the oil sending out unit ago into the oil filter housing. Turn the sending out unit clockwise come tighten. Do not overtighten the sending unit or it might break off. Plug the wiring connector back into the bottom that the oil sending unit.
Crank the engine to make sure that the oil sending unit is working properly and that there room no leaks. Then turn the engine off.
See more: Where Was The Movie Fear Filmed ? Fear (1996 Film)
Jack Jack was standing Lug wrench Open end wrenches tiny catch pan Teflon ice cream instead of oil sending unit
Make sure that the engine has actually cooled off before removing the oil sending unit. The oil sending unit deserve to get an extremely hot and also burn her hands.
Grace Mclain has actually been writing professionally because 1998. Her write-ups have showed up on eHow.com, Answerbag.com and LIVESTRONG.COM, and also she specialization in automotive and business topics. McIain has a expert writing certificate native JB hunt in little Rock, Ark.