i am instead of my left blend door actuator and the door pivot will not move. Exactly how do remove the heater plenum to eliminate the obstruction, and also where is it?


You are watching: 1999 chevy silverado heater core replacement instructions

*

Hello, The heater plenum is under the dash. Right here is a guide to assist you see what you space in for when doing the job. Girlfriend will should vacuum down and recharge the A/C system.https://www.gimpppa.org/articles/re-charge-an-air-conditioner-systemStart through disconnecting the battery and draining the coolant from the engine.https://youtu.be/Eqf-H3COtSoandhttps://www.gimpppa.org/articles/replace-blend-door-motorCheck out the diagrams below on how the job is excellent on her truck and also the places of the mix door actuators chauffeurs side is top top the bottom passenger dye is on the top. You re welcome let us understand if you need anything rather to obtain the difficulty fixed.Cheers, Ken
*

*

*

*



See more: What Is The Greatest Common Factor Of 26 And 65, 91, Use Lcm To Get Gcf Of 26 And 65

good evening, listed below are the action by action instructions through the pictures.Removal Procedure 1. Drain the engine coolant. Refer to Cooling device Draining and Filling (Vac-N-Fill) Cooling mechanism Draining and Filling (Static Fill). 2. Making use of the J 43181 disconnect the inlet heater hose from the heater core. 1. Install the J 43181 come the heater main point pipe. 2. Nearby the tool around the heater main point pipe. 3. Firmly pull the tool right into the quick connect end the the heater hose. 4. Firmly grasp the heater hose. Traction the heater water tap forward in order come disengage the inlet water tap from the heater core. 3. Using the J 43181 disconnect the rise tank outlet hose from the heater core. 1. Download the J 43181 to the heater main point pipe. 2. Close the tool about the heater core pipe. 3. Firmly traction the tool into the quick connect end of the heater hose. 4. Firmly understand the heater hose. Traction the heater hose forward in order to disengage the rise tank outlet hose from the heater core. 4. Remove the top intake manifold sight shield. 5. Remove the battery. 6. Eliminate the accumulator. 7. Remove the instrument dashboard to the business position. 8. Eliminate the nuts (2) native the HVAC module (3). 9. Remove the bolts (1) from the HVAC module (3). 10. Eliminate the HVAC module (3).