Toyota Maintenance: instead of the 3.0L V6 Fuel Filter

Welcome come gimpppa.org! You, your 4x4, and also Access...

You are watching: 1990 toyota pickup fuel filter location

Short Cuts
much more on gimpppa.org: 4x4 technology | 4x4 evaluate | Destinations | 4x4 accessibility more 4x4 technology gimpppa.org: Jeep tech | Jeep projects | Jeep News | Jeep evaluate | Jeep gallery Toyota FAQ | Toyota projects | Toyota maintenance | Toyota 4Runner | Toyota tech | hot Toy | Insider Mitsubishi ~ above gimpppa.org | Mitsubishi tasks | Mitsubishi evaluate | Mitsubishi tech Intro | Isuzu News | Isuzu technology | Isuzu events | gimpppa.org gallery gimpppa.org gimpppa.org BLOG 4x4Voice News-Bytes OutdoorWire - Access central MUIRNet-News Jeep section Toyota ar Mitsubishi section Isuzu section TrailTalk court gimpppa.org Galleries

Author: Joe Micciche - July, 2000

Just aft of the transfer case crossmember, ~ above the inner structure rail at the rear passenger torsion bar mount, is the Toyota 3.0L V6 fuel filter.
Looking front from simply under the passenger side torsion bar mount. This is one more time ns love having actually a body lift.

An infrequent maintenance item ~ above the Toyota van 3.0L V6 entails replacing the fuel filter, just as one would execute on any engine together the usage starts come increase. However, the Toyota technician who located the fuel filter on the truck/4Runner definitely had a robust sense of humor: the filter is located on the passenger next inner frame rail ideal at the behind torsion bar mount. Never mind the there"s 18" the open framework rail just behind this location..... Well, ns guess the is well-protected when wheeling.

Nevertheless, the filter is no terribly an overwhelming to access and replace. To change it, all the is necessary is a 14mm crate wrench for the fuel lines, a 12mm socket for the filter mounts, part rags, and also a drain pan.

IMPORTANT!This EFI engine retains fuel push at every times. Therefore, gas will be in the fuel currently into and out of the filter, and also in the filter itself. To relax the pressure, the vehicle can be started and also the fuse because that the fuel pump pulled, letting the engine operation dry. Electing not to run my EFI mechanism dry, I made decision to job-related cautiously, and enabled the lines come bleed top top removal. Be extremely mindful when act this: I had just under a complete gallon the gas drain into the pan. I also had a fire extinguisher in ~ my side for an emergency, and I removed the optimistic battery cable before doing any work.

I enabled the lines and filter to bleed; recorded the gas in a drain pan and used the in mine lawn mower!

Using the 14mm wrench, loosen the input heat from the gas tank at the back end that the filter. This line is available from underneath, although with the body lift top top my van I found it just as basic to acquire at it from the top. Be prepared to catch and recover any kind of gasoline! Then eliminate the fuel heat from the forward finish of the filter: this one could be tricky since you must acquire to that from above the filter, and an are is at a premium.

Here, the filter and its bracket are removed. The new Toyota filter contains the mounting bracket.

Once the lines space removed, usage the 12mm socket to remove the 2 bolts that find the filter assembly ~ above the structure rail.

The old filter assembly have the right to be removed, and also the new one put in place. Since you may need to "persuade" the lines into the brand-new filter simply a bit, carry out not fully tighten down the assembly yet: leave part slack to manipulate the filter so the lines can be started into the filter.

The brand-new filter assembly from Toyota is situated, then easy torqued down till the fuel lines are started.

Begin tightening the heat nuts. Because there is no means to gain a torque wrench in here, I offered the allude on the threads that had actually been discolored from the elements (and mud) as an point out of how far to tighten them. Once I had the threads around half-way done, ns tightened the filter against the frame rail, then finished turn off the fuel lines.

See more: What Are The 3 Regions That Make Up A Kidney S, Kidney Structure

The brand-new filter"s in, all ready for another 60,000 or therefore miles!

When complete, attempt to start the engine. Ns cranked it briefly to permit pressure to rebuild in the lines and also filter, turned the off, climate it turned best over.